7
Netgear genie app to easily monitor control and repair your WiFi Network
o Available for PC, MAC, Android, iOS
WiFi On/Off switch- convenient power savings or security for ex., when going on vacation
Setting up the NIGHTHAWK X6 is quick and easy with a simple browser-based interface for PCs, Macs,
smartphones, the iPad, and other tablets. NETGEAR Genie™ is a free application that you can use to
monitor, control, and repair home networks. Visit www.netgear.com/landing/en-us/netgear-genie.aspx.
3. Getting Started
This reviewer guide assumes you have received the NIGHTHAWK X6 package. The contents of the
package are:
The NIGHTHAWK X6 router
The power adapter and AC cable
An Ethernet cable
The Installation Guide
Please contact NETGEAR’s PR team if any of these pieces are missing.
The first step in setting up the NIGHTHAWK X6 is finding an appropriate location. For best results,
NETGEAR recommends placing the router:
Near the center of the area where computers and other wireless devices will operate.
Within easy reach of an AC power outlet, as well as the Ethernet cable that provides Internet
access – such as a home cable or DSL modem, or an office network.
At an elevated location, such as a high shelf, keeping the number of walls and ceiling between
the router and wireless devices to a minimum.
Away from any large metal surfaces, such as a solid metal door or aluminum studs. Large
expanses of other materials such as glass, insulated walls, fish tanks, mirrors, brick, and concrete
can also affect the wireless signal.
The second step is connecting the NIGHTHAWK X6 to the Ethernet cable that provides Internet access
and then to AC power. Make sure the NIGHTHAWK X6 is turned on – the power button is found on the
back of the router, at the bottom.
For more information on how to install the the Nighthawk X6, view the Nighthawk X6 installation video.
To view the installation video, visit http://www.netgear.com/R8000_vid1 or use this QR code:
To Next Page
Loading...
Need help?
General
Weight and Dimensions
