26
Use the following equipment to set up this test:
Nighthawk X6-R8000
Three computers connected to the Nighthawk X6
Three computers connected to each R7000
Three NETGEAR Nighthawk-R7000 routers in bridge mode:
To connect three R7000 routers to the Nighthawk X6 using bridge mode:
1. Log in to the Nighthawk X6.
a. Launch an Internet browser from a computer or wireless device that is connected to the
network.
b. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
c. Enter the router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
2. Select Wireless.
3. Specify the settings for the 2.4 GHz band in the Wireless Network (2.4 GHz b/g/n) section.
a. In the Name (SSID) field, enter the wireless network name (SSID).
b. In the Channel section, select a channel.
c. In the Mode section, select a mode.
d. In the Security Option section, select a radio button.
e. If prompted, in the Password (Network Key) field, type the passphrase (the WiFi
password that you use to connect wirelessly to the other router).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
