4.
Click the ADVANCED tab.
5.
In the Internet Port pane, click the Connection Status button.
The Connection Status window displays. The information that displays depends on
the type of Internet connection.
For example, if your Internet connection does not require a login and the router
receives an IP address automatically, the window displays the following information:
•
IP Address: The IP address that is assigned to the router.
•
Subnet Mask: The subnet mask that is assigned to the router.
•
Default Gateway: The IP address for the default gateway that the router
communicates with.
•
DHCP Server: The IP address for the Dynamic Host Configuration Protocol server
that provides the TCP/IP configuration for all the computers that are connected
to the router.
•
DNS Server: The IP address of the Domain Name Service server that provides
translation of network names to IP addresses.
•
Lease Obtained: The date and time when the lease was obtained.
•
Lease Expires: The date and time that the lease expires.
6.
To release (stop) the Internet connection, click the Release button.
If you are using a PPPoE, PPTP, or L2TP connection, the name of the button might
be different.
7.
To renew the Internet connection, click the Renew button.
If you are using a PPPoE, PPTP, or L2TP connection, the name of the button might
be different.
8.
To exit the page, click the Close Window button.
View and manage logs of router activity
The log is a detailed record of the websites you accessed or attempted to access and
other router actions. Up to 256 entries are stored in the log.
To view and manage logs:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
User Manual112Mantain and Monitor Your
Network
Whole Home Quad-Band Mesh WiFi 7 System
To Next Page
Loading...
Need help?
General
