NETGEAR Orbi RBE970 User Manual

Table 7. Factory default settings for the Orbi satellite (Continued)
Default SettingFeature
WiFi
EnabledWiFi communication
See satellite labelSSID name
WPA3Security
EnabledBroadcast SSID
Auto
Note: Maximum wireless signal rate derived from IEEE Standard 802.11
specifications. Actual throughput can vary. Network conditions and
environmental factors, including volume of network traffic, building
materials and construction, and network overhead, lower actual data
throughput rate.
Transmission speed
United States of America; otherwise, varies by regionCountry/region
AutoRF channel 2.4 GHz fronthaul
AutoRF channel 2.4 GHz backhaul
North America and China: Channel 48
Worldwide and Japan: Channel 36
RF channel 5 GHz fronthaul
North America and China: Channel 157
Worldwide and Japan: Channel 108
RF channel 5 GHz backhaul
HE20: 33–233
HE40: 35–227
HE80: 39–215
HE160: 45–209
RF channel 6 GHz fronthaul
(only fronthaul supported)
-
Technical specifications for the Orbi router
The following table shows the technical specifications for the Orbi router.
Table 8. Technical specifications for the Orbi router
DescriptionFeature
TCP/IP, RIP-1, RIP-2, DHCP, PPPoE, L2TP, PPTP, Dynamic DNS, UPnP,
and SMB
Data and routing protocols
19V/3.16APower adapter
User Manual165Factory Settings and Technical
Specifications
Whole Home Quad-Band Mesh WiFi 7 System

NETGEAR Orbi RBE970 Specifications

General

Brand	NETGEAR
Model	Orbi RBE970
Category	Network Router
Language	English