NETGEAR Orbi RBE970 User Manual

Enable or disable the IoT network
To enable or disable the IoT network:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2.
Enter orbilogin.net.
A login window displays.
3.
Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4.
Select Wireless.
The Wireless Setup page displays.
5.
In the Wireless IoT Settings section, select or clear the Enable IoT Network check
box.
Selecting the check box enables the IoT network. Clearing this check box disables
the IoT network.
6.
Click the Apply button.
Your settings are saved.
Change the WiFi radio band for the IoT network
To change the WiFi radio band fort the IoT network:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2.
Enter orbilogin.com.
A login window displays.
3.
Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
User Manual66Manage the WiFi Settings
Whole Home Quad-Band Mesh WiFi 7 System

NETGEAR Orbi RBE970 Specifications

General

Brand	NETGEAR
Model	Orbi RBE970
Category	Network Router
Language	English