NETGEAR Orbi RBE970 User Manual

Use auto detection for an IPv6 Internet connection..................38
Use auto configuration for an IPv6 Internet connection...........39
Set up an IPv6 6to4 tunnel Internet connection.........................41
Set up an IPv6 pass-through Internet connection......................43
Set up an IPv6 fixed Internet connection....................................43
Set up an IPv6 DHCP Internet connection..................................45
Set up an IPv6 PPPoE Internet connection..................................47
Set up an IPv6 6rd tunnel Internet connection...........................49
Change the MTU size.........................................................................51
Chapter 4 Control Access to the Internet
Manage NETGEAR Armor.................................................................54
Network access control list................................................................54
Enable the network access control list, set the access rule, and
allow or block connected devices...............................................55
Manage allowed devices currently not on the network............57
Manage blocked devices currently not on the network...........59
Chapter 5 Manage the WiFi Settings
About the WiFi networks...................................................................62
Manage the settings for the main WiFi network.............................62
Change the name of the main WiFi network..............................63
Change the 2.4 GHz, 5 GHz, or 6 GHz WiFi channel.................63
Change the WiFi password or security option for the main WiFi
network............................................................................................64
Manage the IoT WiFi settings...........................................................65
Enable or disable the IoT network...............................................66
Change the WiFi radio band for the IoT network......................66
Change the WiFi network name for the IoT network................67
Change the WiFi password for the IoT network........................68
Set up a guest WiFi network.............................................................68
Change your region...........................................................................70
Enable or disable 20/40 MHz coexistence for the 2.4 GHz radio.70
Change the preamble mode for a radio.........................................71
Change the transmission power control.........................................72
Generate a new backhaul password................................................73
Use the router as a WiFi access point only......................................74
Chapter 6 Specify Network Settings
View or change WAN settings..........................................................77
Manage the WAN preference...........................................................78
Set up WAN aggregation..............................................................78
Change the WAN preference back to the Internet port...........79
Manage Dynamic DNS.......................................................................80
5
Whole Home Quad-Band Mesh WiFi 7 System

NETGEAR Orbi RBE970 Specifications

General

Brand	NETGEAR
Model	Orbi RBE970
Category	Network Router
Language	English