NETGEAR Orbi User Manual

Specify Network Settings
71
Orbi High-Performance AC3000 Tri-band WiFi System
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Static Routes.
The Static Routes page displays.
5. In the table, select the radio button for the route.
6. Click the Delete button.
The route is removed from the table.
Specify Basic WiFi Settings
The router and satellite come preset with the same WiFi network name (SSID) and the same
WiFi security. You can find the SSID and password on the router label and on the satellite
label. If you log in to the router and change the WiFi settings, the router automatically sends
the new settings to the satellite.
If you change your WiFi settings, make a note of the new settings and store it in a safe place
where you can easily find it.
If your computer or mobile device is using a WiFi connection when you change the network
name (SSID) or other WiFi security settings, you are disconnected when you click the Apply
button. To avoid this problem, use a computer with a wired connection to access the router.
 To specify basic WiFi settings:
1. Launch a web browser from a computer or WiFi device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home page displays.

NETGEAR Orbi Specifications

General

Parental Controls	Yes
Guest Network	Yes
Beamforming	Yes
Coverage	Up to 5, 000 sq. ft.
Ethernet Ports	4 Gigabit Ethernet ports
Memory	512MB NAND flash
Security	WPA2
Compatibility	Works with