NETGEAR Powerline PLP2000 User Manual

11
Pick A Plug LED is
amber or red.
Something is interfering with communication between
adapters. To resolve this, do the following:
• Move the adapter to another outlet.
• Unplug devices that might be causing interference
such as surge suppressors and items with motors.
Ethernet LED is o. • Make sure that the Ethernet cables are working
and securely plugged into the devices.
• Press and hold the Security/Factory Reset
button on each Powerline adapter for 8 to 10
seconds to return the device to its factory default
settings.

NETGEAR Powerline PLP2000 Specifications

General

Model	PLP2000
Type	Powerline Adapter
Powerline Speed	2000 Mbps
Passthrough Power Outlet	Yes
HomePlug AV2	Yes
Encryption	128-bit AES
Operating Temperature	0°C to 40°C
Operating Humidity	10% to 90% non-condensing
Standards and Protocols	HomePlug AV2, IEEE 1901
Ethernet Ports	2 Gigabit Ethernet ports
Plug Type	US