Need help?Do you have a question about the NETGEAR XET1001 - Powerline Network Adapter and is the answer not in the manual?
General| Product Type | Powerline Network Adapter |
|---|---|
| Model | XET1001 |
| Brand | NETGEAR |
| Data Transfer Rate | 1000 Mbps |
| Interface | Ethernet |
| Number of Ethernet Ports | 1 |
| Powerline Standard | HomePlug AV2 |
| Encryption | 128-bit AES |
| Standards | IEEE 802.3, IEEE 802.3u |
| Security | 128-bit AES encryption |
| Maximum Data Rate | 1000 Mbps |
| HomePlug AV2 Standard | Yes |
| MIMO Support | Yes |
| Power Pass-Through | No |
| Operating Voltage | 100 - 240 VAC |
| Operating Frequency | 50/60 Hz |
| Ports | 1 x Ethernet |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
| Dimensions (W x D x H) | 3.5 x 2.2 x 1.5 in |
How to add a device when the computer is locally connected.
How to add a device when the computer is remotely connected.
Troubleshooting steps if the power light is not on.
To Next Page