NETGEAR ProSafe WNAP320 Specifications

ProSafe Wireless-N Access Point WNAP320
Features
Frequency 2.4GHz and 5.0GHz 2.4GHz 2.4GHz 2.4GHz
Maximum theoretical throughput t
t t t
Power over Ethernet t t t t
(PoE) IEEE 802.3af
PoE power consumption 12.7 Watts 5.8 Watts 6 Watts 5 Watts
Wireless Distribution System (WDS)
Repeater t
t  t t
Bridge point-to-point/multi-point t
t t t
Simultaneous bridge t t t t
& wireless client association
Separate bridge and access point t t t t
Client Mode t t  t t
SNMP v1, v2c v1, v2c v1, v2c v1, v2c
Antenna Two (2) Internal 5 dBi Two (2) Internal 5 dBi Two (2) Internal 5 dBi One (1) 1 dBi detachable
Two (2) reverse SMA connectors Two (2) reverse SMA connectors
User support Up to 64 users per radio Up to 64 users Up to 32 users Up to 32 users
Security
Wi-Fi Protected Access t
t t t
(WPA/WPA2), 802.11i
Multiple VPN pass-through support t
t t t
MAC address filtering with access t t t t
control lists–up to 256 users
802.1x RADIUS support t t t t
with EAP TLS, TTLS, PEAP
Rogue AP detection t
t t
Block SSID Broadcast t t t
Secure SSH Telnet t t t
Secure Socket Layer (SSL) t
t t t
Remote management login t t t t
Peer-to-peer blocking so t t t t
users may not access
another user’s PC
MBSSID/VLAN Support 16/17 8/9 8/9 8/9
WPA Support t
t t t
(WPA2 – Enterprise, 802.11i)
User Interface t t t t
Browser-based Interface t t t t
Accepts accessory antennas t t t
ProSafe
®
Wireless-N
Access Point
(WNAP210)
ProSafe 802.11g
Wireless
Access Point
(WG103)
ProSafe
®
Dual Band Wireless-N
Access Point
(WNDAP350)
ProSafe
Wireless-N
Access Point
(WNAP320)

NETGEAR ProSafe WNAP320 Specifications

General

Brand	NETGEAR
Model	ProSafe WNAP320
Category	Wireless Access Point
Language	English