111
11
11. Network Settings
The router comes ready for WiFi, Ethernet, and USB connections. You can customize the
router’s network settings. NETGEAR recommends that you install the router and connect it to
the Internet before you change its network settings.
This chapter includes the following sections:
• Disable LED Blinking or Turn Off LEDs
• View WAN Settings
• Set Up a Default DMZ Server
• Change the Router’s Device Name
• Change the LAN TCP/IP Settings
• Specify the IP Addresses That the Router Assigns
• Disable the DHCP Server Feature in the Router
• Reserve LAN IP Addresses
• Use the WPS Wizard for WiFi Connections
• Specify Basic WiFi Settings
• Change the WiFi Password or Security Level
• Set Up a Guest Network
• Control the Wireless Radios
• Set Up a Wireless Schedule
• Specify WPS Settings
• Use the Router as a Wireless Access Point
To Next Page
Loading...
