NETGEAR R8000 Nighthawk X6 AC3200 User Manual

Network Settings
128
Nighthawk X6 AC3200 Tri-Band WiFi Router
4. Select ADVANCED > Advanced Setup > Wireless Settings.
5. In the 2.4 GHz and 5 GHz sections of the screen, select or clear the Enable Wireless
Radio check boxes.
Clearing these check boxes turns off the WiFi feature of the router for each band.
6. Click the Apply button.
If you turned off both wireless radios, the WiFi On/Off LED and the WPS LED turn off. If
you turned on the wireless radios, the WiFi On/Of
f LED and the WPS LED light.
Set Up a Wireless Schedule
You can turn off the wireless signal from your router at times when you do not need a
wireless connection. For example, you might turn it off for the weekend if you leave town.
 To set up the wireless schedule:
1. Launch an Internet browser from a computer or wireless device that is connected to the
network.
2. T
ype http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3. Enter the router user name and password.
The user name is admin.
The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.

NETGEAR R8000 Nighthawk X6 AC3200 Specifications

General

WiFi Performance	AC3200 (600 + 1300 + 1300 Mbps)
WiFi Range	Very large homes
Tri-Band	Yes
Dynamic QoS	Yes
Smart Connect	Yes
VPN Support	Yes
Guest Network	Yes
Parental Controls	Yes
WiFi Technology	802.11ac
Number of Ethernet Ports	5 (1 WAN & 4 LAN) Gigabit Ethernet ports
USB Ports	1 USB 3.0 port, 1 USB 2.0 port
Processor	Dual-core 1GHz
Memory	256MB RAM and 128MB flash
Beamforming	Beamforming+
Security	WPA2 wireless security
Antenna	6 high-performance antennas