NETGEAR R8000 Nighthawk X6 AC3200 User Manual

Share USB Devices Attached to the Router
84
Nighthawk X6 AC3200 Tri-Band WiFi Router
View Network Folders on a USB Device
You can view or change the network folders on the USB storage device.
 To view network folders:
1. Launch an Internet browser from a computer or wireless device that is connected to the
network.
2. T
ype http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3. Enter the router user name and password.
The user name is admin.
The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4. Select ADV
ANCED > USB Storage > Advanced Settings.
5. Scroll down to the Available Networks Folder section of the screen, and adjust the following
settings:
• Share Name. If only one device is connected, the default share name is
USB_Storage. (Some router models have more than one USB port.)
You can click the name or you can type it in the address field of your web browser. If
Not Shared is shown, the default share was deleted and no other share for the root
folder exists. Click the link to change this setting.

NETGEAR R8000 Nighthawk X6 AC3200 Specifications

General

WiFi Performance	AC3200 (600 + 1300 + 1300 Mbps)
WiFi Range	Very large homes
Tri-Band	Yes
Dynamic QoS	Yes
Smart Connect	Yes
VPN Support	Yes
Guest Network	Yes
Parental Controls	Yes
WiFi Technology	802.11ac
Number of Ethernet Ports	5 (1 WAN & 4 LAN) Gigabit Ethernet ports
USB Ports	1 USB 3.0 port, 1 USB 2.0 port
Processor	Dual-core 1GHz
Memory	256MB RAM and 128MB flash
Beamforming	Beamforming+
Security	WPA2 wireless security
Antenna	6 high-performance antennas