NETGEAR R8300 User Manual

6
Network Settings
The router comes ready for WiFi, Ethernet, and USB connections.You can customize the router’s network settings. We
recommend that you install the router and connect it to the Internet before you change its network settings.
This chapter includes the following sections:
• View or Change WAN Settings on page 66
• Set Up a Default DMZ Server on page 67
• Ethernet Port Aggregation on page 68
• Change the LAN TCP/IP Settings on page 71
• Change the Router’s Device Name on page 73
• Specify the IP Addresses That the Router Assigns on page 73
• Disable the DHCP Server Feature in the Router on page 92
• Manage Reserved LAN IP Addresses on page 75
• Custom Static Routes on page 77
• Set Up a Bridge for a Port Group or VLAN Tag Group on page 80
• Use the WPS Wizard for WiFi Connections on page 83
• Specify Basic WiFi Settings on page 84
• Set Up a Guest WiFi Network on page 88
• Control the WiFi Radios on page 89
• Set Up a WiFi Schedule on page 90
• Specify WPS Settings on page 91
• Use the Router as a WiFi Access Point on page 93
• Use the Router in Bridge Mode on page 95
65

NETGEAR R8300 Specifications

General

Brand	NETGEAR
Model	R8300
Category	Network Router
Language	English