NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual
1-2 Configuring Basic Connectivity
v1.0, February 2008
Logging In to Your Wireless Router
When the wireless router is connected to your network, you can access and configure the router
using your browser.
To access the Web Configuration Manager:
1. Connect to the wireless router by typing http://www.routerlogin.net or the router’s LAN IP
address (default is 192.168.1.1) in the address field of your browser, and then press Enter. A
login window displays:
2. Enter admin for the router user name and your password (or the default, password
). For
information about how to change the password, see “Changing the Administrator Password”
on page 2-19.
Figure 1-1
Tip: You can connect to the wireless router by typing either of these URLs in the
address field of your browser, and then pressing Enter:
• http://www.routerlogin.net
• http://www.routerlogin.com
If these URLs do not work, you must type the IP address of the router, for
example, http://www.192.168.1.1.
Note: The router user name and password are not the same as any other user name or
password you might use to log in to your Internet connection.
To Next Page
Loading...
Need help?
General
