NETGEAR RangeMax WNR1000 User Manual

2 Getting to Know Your Wireless Router
To prepare your router for installation:
1.
Carefully peel off the protective film covering the sides of your router.
2. Set up your wireless router by inserting the router into the stand supplied with it.
3. Place your router in a suitable area for installation (near an AC power outlet and accessible to
the Ethernet cables for your wired computers).
Hardware Features
Before you install and connect your router, take a moment to become familiar with the front and
back panels of the router—especially the status lights on the front panel.
Figure 1

NETGEAR RangeMax WNR1000 Specifications

General

WiFi Technology	802.11n
Frequency Band	2.4 GHz
Wireless Speed	Up to 150 Mbps
Antenna	Internal
Ethernet Ports	4 x 10/100 Mbps
Security	WPA, WPA2, WEP