NETGEAR RAX10 User Manual

To erase the settings:
1.
Launch a web browser from a computer or mobile device that is connected to the
router network.
2.
Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Administration > Backup Settings.
The Backup Settings page displays.
5. Click the Erase button.
The configuration is reset to factory default settings. When the reset is complete,
the router restarts. This process takes about two minutes.
WARNING: To avoid the risk of corrupting the firmware, do not interrupt the reset.
For example, do not close the browser, click a link, or load a new page. Do not turn
off the router. Wait until the router finishes restarting.
Restore the settings
To restore configuration settings that you backed up:
1.
Launch a web browser from a computer or mobile device that is connected to the
router network.
2.
Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Administration > Backup Settings.
The Backup Settings page displays.
5.
Click the Browse button to find and select the .cfg file.
6. Click the Restore button.
User Manual102Manage Your Router
4-Stream AX1800 WiFi 6 Router

NETGEAR RAX10 Specifications

General

WiFi Technology	WiFi 6 (802.11ax)
WiFi Performance	AX1800
Wireless Speed	Up to 1.8Gbps
Antenna	4 External Antennas
Beamforming	Yes
MU-MIMO	Yes
OFDMA	Yes
Maximum Speed	Up to 1.8Gbps
Number of Ethernet Ports	5
Ethernet Ports	4 x Gigabit Ethernet
Security	WPA3
Memory	128MB Flash and 256MB RAM
WiFi Band	Dual-band (2.4 GHz & 5 GHz)