NETGEAR RAX10 User Manual

14.
To specify the destination folder, click the Browse button and select a destination
folder.
15. Click the Install button.
The window displays the progress of the installation and then displays the final
installation page.
16. Click the Finish button.
17.
Unzip the configuration files that you downloaded and copy them to the folder where
the VPN client is installed on your device.
For a client device with Windows 64-bit system, the VPN client is installed at
C:\Program files\OpenVPN\config\ by default.
18.
For a client device with Windows, modify the VPN interface name to NETGEAR-VPN:
a.
On your computer, go to the Networks page. If you are using Windows 10, select
Control Panel > Network and Sharing Center > Change adapter settings.
b.
In the local area connection list, find the local area connection with the device
name TAP-Windows Adapter.
User Manual111Use VPN to Access Your Network
4-Stream AX1800 WiFi 6 Router

NETGEAR RAX10 Specifications

General

WiFi Technology	WiFi 6 (802.11ax)
WiFi Performance	AX1800
Wireless Speed	Up to 1.8Gbps
Antenna	4 External Antennas
Beamforming	Yes
MU-MIMO	Yes
OFDMA	Yes
Maximum Speed	Up to 1.8Gbps
Number of Ethernet Ports	5
Ethernet Ports	4 x Gigabit Ethernet
Security	WPA3
Memory	128MB Flash and 256MB RAM
WiFi Band	Dual-band (2.4 GHz & 5 GHz)