NETGEAR RAX200 User Manual

3
Specify Your Internet Settings
Usually, the quickest way to set up the router to use your Internet connection is to allow
your router to detect the Internet connection automatically when you first access the
router web interface. You can also customize and manually specify your Internet settings.
This chapter contains the following sections:
• Use the Internet Setup Wizard
• Manually set up the Internet connection
• Set up the Multi-Gig port on your router
• Get Multi-Gig Internet With Internet Port Aggregation
• Specify IPv6 Internet connections
• Manage the MTU size
25

NETGEAR RAX200 Specifications

General

USB Ports	2x USB 3.0
Beamforming	Yes
MU-MIMO	Yes
OFDMA	Yes
WiFi Technology	802.11ax
Processor	1.8GHz Quad-Core Processor
Ethernet Ports	1x 2.5G WAN, 4x 1G LAN
Security	WPA3
Memory	512MB NAND flash, 1GB RAM
Antenna	8x High-Performance Antennas