To Next Page

To Previous Page

Set Up Ethernet Port Aggregation

If you are connecting a switch, make sure that your switch supports 802.3ad LACP.

To set up Ethernet port aggregation:

Set up Ethernet port aggregation on your device before connecting it to your router.

Note: If your device supports a static link aggregation group (LAG) only, you must

enable static mode before you connect your device to Ethernet ports 4 and 5 on the

router. See Step 3 for more information about how to enable static mode on your

router.

For information about how to set up Ethernet port aggregation on your router or

computer, see the documentation that came with your router or computer.

2. Connect your device to Ethernet ports 4 and 5 on the router.

3. Log in to your router and enable Ethernet port aggregation:

Launch a web browser from a computer or mobile device that is connected to

the router network.

Enter http://www.routerlogin.net.

A login window opens.

c. Enter the router admin user name and password.

The user name is admin. The password is the one that you specified the first time

that you logged in. The user name and password are case-sensitive.

The BASIC Home page displays.

d. Select ADVANCED > Advanced Setup > Ethernet Port Aggregation.

The Ethernet Port Aggregation page displays.

e. Select an Ethernet port aggregation mode (note that Ethernet port aggregation

is disabled by default):

•

Enable (LACP-IEEE 803.3ad). The router communicates with the device

connected to Ethernet ports 4 and 5 on your router, and checks to see if

Ethernet port aggregation is supported on the device. If Ethernet port

aggregation is supported, the router automatically trunks Ethernet ports 4

and 5. If not, Ethernet ports 4 and 5 work as independent Ethernet ports. We

recommend that you select this mode unless your NAS or switch can support

static LAG only.

•

Static LAG. If your device supports a static link aggregation group (LAG) only,

select this mode. Otherwise, we recommend that you to select the Enable

(LACP-IEE 803.3ad) radio button instead.

User Manual90Manage Network Settings

Nighthawk Tri-Band AX12 12-Stream AX WiFi Router

NETGEAR RAX200 User Manual

Questions and Answers: