NETGEAR RAX36S - Set up WPA;WPA2 Enterprise Wifi Security

7. Click the Apply button.
Your settings are saved.
Set up WPA/WPA2 Enterprise WiFi security
Remote Authentication Dial In User Service (RADIUS) is an enterprise-level method for
centralized Authentication, Authorization, and Accounting (AAA) management. To
enable the router to provide WPA and WPA2 enterprise WiFi security, the WiFi network
that the router provides must be able to access a RADIUS server.
Note: If you use WPA/WPA2 Enterprise security, you cannot use Wi-Fi Protected Setup
(WPS).
To set up WPA/WPA2 Enterprise security:
1.
Launch a web browser from a computer or mobile device that is connected to the
router network.
2.
Enter http://www.routerlogin.net.
A login window displays.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4.
Do one of the following:
•
Router’s WiFi network: To set up WPA/WPA2 Enterprise security for the router’s
WiFi network, select Wireless.
The Wireless Settings page displays.
•
Guest WiFi network: To set up WPA/WPA2 Enterprise security for the guest
WiFi network, Guest Network.
The Guest Network Settings page displays.
5.
For the 2.4 GHz or 5 GHz WiFi network, select the WPA/WPA2 Enterprise radio
button:
User Manual70Manage Network Settings
4-Stream AX3000 WiFi 6 Router Model RAX36S