NETGEAR RAX36S - Enable or Disable Implicit Beamforming

4. Select ADVANCED > Advanced Setup > Static Routes.
The Static Routes page displays.
5.
In the table, select the radio button for the route.
6. Click the Delete button.
The route is removed from the table.
Enable or disable implicit beamforming
Beamforming shapes a directional WiFi signal aimed at a WiFi client based on the client’s
location, as opposed to radiating the signal out in all directions. This feature improves
WiFi range and performance. Clients do not need to support beamforming to benefit
from implicit beamforming.
To enable or disable implicit beamforming:
1.
Launch a web browser from a computer or mobile device that is connected to the
router network.
2.
Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Wireless Settings.
The Wireless Settings page displays.
5. Select or clear the Enable Implicit BEAMFORMING check box.
Selecting this check box enables implicit beamforming. Clearing this check box
disables implicit beamforming.
6. Click the Apply button.
Your settings are saved.
If you connected over WiFi to the network, you are disconnected from the network
and must reconnect.
User Manual83Manage Network Settings
4-Stream AX3000 WiFi 6 Router Model RAX36S