NETGEAR RAX43 User Manual

To enable or disable the WiFi radios:
1.
Launch a web browser from a computer or mobile device that is connected to the
router network.
2.
Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Wireless Settings.
The Wireless Settings page displays.
5.
Do one of the following for your router’s WiFi networks:
•
Turn off the WiFi radio. Clear the Enable Wireless Router Radio check box.
•
Turn on the WiFi radio. Select the Enable Wireless Router Radio check box.
6. Click the Apply button.
Your settings are saved.
Set up a WiFi schedule
You can turn off the WiFi signal from your router at times when you do not need a WiFi
connection. For example, you might turn it off for the weekend if you leave town.
To set up the WiFi schedule:
1.
Launch a web browser from a computer or mobile device that is connected to the
router network.
2.
Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Wireless Settings.
The Wireless Settings page displays.
User Manual71Manage Network Settings
Nighthawk AX5 5-Stream WiFi Router

NETGEAR RAX43 Specifications

General

USB Ports	1 x USB 3.0
Antenna	4 external antennas
Beamforming	Yes
MU-MIMO	Yes
OFDMA	Yes
WiFi Technology	WiFi 6 (802.11ax)
Ethernet Ports	5 x 1G Ethernet ports
Security	WPA3
Memory	512MB RAM
Bands	Tri-band (2.4 GHz, 5 GHz, 5 GHz)