NETGEAR ReadyNAS 4312

Replace the On-Board Battery on a ReadyNAS 2120, 3130
or 3138
To replace the battery of a ReadyNAS 2120, 3130 or 3138 storage system:
1. Open the system and locate the battery holder.
2. Remove the old battery.
3. Install the new battery.
Take care to install the new battery with the correct side up.
Replace the On-Board Battery on a ReadyNAS 3220, 3312,
3312 v2, 4220, 4312, 4312 v2, or 4360
To replace the battery of a ReadyNAS 3220, 3312, 3312 v2, 4220, 4312, 4312 v2,
or 4360 storage system:
1. Open the system and locate the battery holder.
The following figure shows the location of the battery holder for the ReadyNAS 3302
and 4220 systems. The battery holder in the ReadyNAS 3312, 3312 v2, 4312, 4312 v2,
and 4360 systems is located toward the front left corner of the enclosure.
2. Remove the old battery.
Hardware Manual106Maintenance
ReadyNAS OS 6