4.
Access the inside of your ReadyNAS system.
For details on accessing the inside, see Access the Inside of the Storage System on
a ReadyNAS 3220, 3312, 3312 v2, 4220, 4312, 4312 v2, or 4360 on page 99.
5. Locate the PCI expansion slots on the system motherboard.
6. Align the SAS card with the expansion slot and press the module down until the tabs
snap into place.
7. Replace the chassis cover.
8.
Reinstall the ReadyNAS system if you needed to uninstall it.
9. Plug in the ReadyNAS system and turn on the power.
Hardware Manual108Maintenance
ReadyNAS OS 6
To Next Page
Loading...
