ReadyNAS 2100 User Manual
1-6 Getting Acquainted
v1.0, May 2009
6. LAN1
LAN2
Ethernet
Ports.
On (Green)
On (Amber)
Blinking
Off
The LAN port is operating at 1,000 Mbps.
The LAN port is operating at 100 Mbps.
Data communications activity.
The LAN port is operating at 10 Mbps.
7. Power Status
LED.
On (Blue)
Off
Power is supplied to the ReadyNAS 2100.
Power is not supplied to the ReadyNAS 2100.
8. SYS Reset
Button.
Recessed
push button,
activated by
pressing it with
a pen tip or
paper clip
Power cycle the ReadyNAS 2100.
Also provides access to the diagnostic startup menu: Normal,
Factory Restore (which erases all data), OS Reinstall, Tech
Support remote diagnostics, Skip Volume Check, Memory
Test.
For diagnostics, see “Control Panel Status and Diagnostic
Information” on page 6-3.
9. Power
Button.
On (Blue)
Blinking
Off
On: Power is supplied to the ReadyNAS 2100.
Blink: The ReadyNAS 2100 is booting.
Preferred Shutdown: If the unit OS is running, pressing the
power switch once will begin graceful shutdown blink pattern
on the LEDs. Pressing the power button a second time
confirms and initiates the graceful shutdown.
Forced Shutdown: If the unit is hung, you can press and hold
the power button for 5 seconds to force shutdown.
Power is not supplied to the ReadyNAS 2100.
Diagnostics
: See “Control Panel Status and Diagnostic
Information” on page 6-3.
Table 1-1. LED Descriptions (continued)
Item Activity Description
To Next Page
Loading...
