ReadyNAS 2100 User Manual
Getting Acquainted 1-5
v1.0, May 2009
Control Panel
The function of each Control Panel item is described in the following table:
Figure 1-3
Table 1-1. LED Descriptions
Item Activity Description
1. Backup
Button.
Push button Backup: Push to initiate FrontView scheduled backup jobs.
Diagnostics: Toggles between boot menu options (see SYS
Reset below).
Diagnostics
: See “Control Panel Status and Diagnostic
Information” on page 6-3.
2. Front
USB Port.
USB Port Connect USB devices.
3. USB Status
LED.
On (Green)
Blinking (Green)
Off
On: A USB device is mounted.
Blink: USB device dismounting or FrontView scheduled
backup running.
Off: USB device dismounted.
4. Disk
LEDs
.
On (Green)
Blink (Green)
Off
On: Disk installed
Blink:
• Slow blink: disk resynching or disk failure.
• Fast blink for 10 seconds: Power button just pushed.
• Panic blink: Warning that power button pressed & held.
• “Marching” LEDs: volume expansion in progress.
Off: No disk installed
Diagnostics
: See “Control Panel Status and Diagnostic
Information” on page 6-3.
5. Activity LED.
On/Blinking
(Green)
Off
One or more disks is being accessed.
To Next Page
Loading...
