ReadyNAS 2100 User Manual
3-4 Managing User Access
v1.0, May 2009
Domain Security Mode
If you choose the Domain security mode option, you need to create a trusted relationship with the
domain controller or the active directory server (ADS) that will act as the authentication server for
the ReadyNAS 2100 device.
You need the following information:
• Domain name
• Domain administrator login
• Domain administrator password
• If using ADS:
– DNS name of the ADS realm
– OU (Organization Unit). You can specify nested OUs by separating OU entries with
commas. The lowest level OU must be specified first.
You can elect to have the ReadyNAS 2100 automatically auto-detect the domain controller, or you
can specify the IP address. Sometimes auto-detect fails, and you need to supply the IP address of
the domain controller to join the domain.
Figure 3-3
To Next Page
Loading...
