NETGEAR RT311

2 Index
filter type, Generic IP 10-4
filters, configuring 10-1
front panel 2-3
FTP 9-9, 11-9
FTP, updating the router software 9-10
G
gateway address 3-8, 3-9
Gateway IP Address field, Edit IP Static Route menu
5-9, 8-7
General Setup menu 7-8
Generic Filter Rule menu 10-9
H
host name 4-3, 7-8
I
IANA
contacting B-2
IETF xv
Web site address B-7
IGMP 5-5, 7-13
Input and Output Filters field, Ethernet Setup menu
7-11
installation 1-2, 1-4
Internet account
address information 3-7
establishing 3-7
Internet, accessing 8-1
IP addresses 3-8, 3-9
and NAT B-8
and the Internet B-2
assigning xvi, B-2
auto-generated 11-3
masquerading 1-3
private B-7
translating xvi
IP configuration by DHCP B-10
IP networking
for Macintosh 3-5
for Windows 3-2
IP Protocol field, TCP/IP Filter Rule menu 10-7
IP Source Route field, TCP/IP Filter Rule menu 10-7
IP Subnet Mask field, Edit IP Static Route menu 5-9,
8-7
L
LAN Setup Menu 5-3
LEDs
description 2-4
troubleshooting 11-2
Length field, Generic Filter Rule menu 10-9
log 9-4
Log and Trace menu 9-4
Log Facility field, Syslog and Accounting menu 9-5
Log field
Generic Filter Rule menu 10-10
TCP/IP Filter Rule menu 10-8
M
MAC Address 7-9, 11-7, B-9
MAC address, spoofing 4-6
Macintosh 3-8
configuring for IP networking 3-5
DHCP Client ID 3-6
Obtaining ISP Configuration Information 3-9
Manager interface
commands 7-6
menus 7-6
troubleshooting 11-7
using for configuring 1-2
Manager interface menus
Diagnostic 9-6, 9-7
Edit IP Static Route 8-7
Filter Rules Summary 10-3, 10-9
General Setup Menu 7-8
Generic Filter Rule 10-9
Internet Access Setup 8-1
LAN Setup Menu 7-10
Log and Trace 9-4
Main 7-5
Syslog and Accounting 9-5