NETGEAR RT311

Index 3
System Security 7-13
System Status 9-1
TCP/IP Filter Rule 10-6
WAN Setup 7-9
WAN Setup Menu 7-9
MANAGER port 2-7
Mask field, Generic Filter Rule menu 10-9
Metric field
Edit IP Static Route menu 5-10, 8-8
mode, command interpreter 9-11
More field
Generic Filter Rule menu 10-9
TCP/IP Filter Rule menu 10-8
Multicast 5-5, 7-13
N
Name field, System Maintenance menu 9-3
NAT.
See
Network Address Translation
NetBIOS Name Service 10-11
NETGEAR
contacting xv
netmask
translation table B-6
Network Address Translation 1-3, B-8
O
Offset field, Generic Filter Rule menu 10-9
P
package contents 2-1
password
changing 7-13
entering at startup 7-5
restoring 11-8
PC, using to configure 3-10
pinout, Ethernet cable B-10
port
locations 2-5
MANAGER 2-7
serial, connecting 7-2
Port Forwarding 5-6
port forwarding behind NAT B-9
Port Forwarding Menu 5-6
power, connecting 7-4
PPP over Ethernet 1-2, 1-4, 3-7, 8-2
PPPoE 1-2, 1-4, 3-7, 4-4, 8-2
PPTP, login for Europe 4-4
Private field
Edit IP Static Route menu 5-10, 8-8
protocols
Address Resolution B-9
DHCP 1-3, B-10
Routing Information 1-3, B-2
support 1-2
publications, related xv
R
RAS S/W Version, System Maintenance menu 9-3
rear panel 2-5
rear panel, RT311 2-5
rear panel, RT314 2-5
requirements
access device 2-2
hardware 2-2
restore factory settings 6-5
RFC
1466 xvi, B-7
1597 xvi, B-7
1631 xvi, B-8
finding B-7
RoadRunner 3-7, 4-5, 8-3
Route Name field, Edit IP Static Route menu 5-9, 8-7
router concepts B-1
Routing Information Protocol 1-3, B-2
S
security 1-2, 1-4, 7-13
serial cable 2-7
serial port, connecting to 7-2
Service Name 4-4