Reference Manual for the NETGEAR Storage Central SC101
5-3
v1.0, September 2005
Creating a New Drive
You need to create at least one drive for each computer that will store data on a hard disk in the
Storage Central SC101.
1. From the Wizard Option screen, select Create a New Drive, and click Next.
2. Select which physical hard disk in the Storage Central SC101 to store data for this PC.
3. Enter the name and size for the new drive that you are creating.
4. You will be asked if you want to mirror the
drive and if the drive will be shared.
• Mirroring: Requires two hard disks
installed in the SC101. Duplicates all
data for the new drive that you are
creating on the other hard disk.
• Sharing: Allows more than one
computer to access the data at the same
time.
5. When prompted, enter a password if you
plan to use security (recommended).
Figure 5-3
6. Follow the wizard prompts. When the
wizard is complete, this computer will have
a new drive available that you can see in
Windows Explorer with the drive letter that
you specified.
Figure 5-4
To Next Page
Loading...
Need help?
General
