NETGEAR WAX202 - Page 109

When the AP receives an IP address dynamically (which is the most common type
of connection), the following information displays:
•
IP Address: The IP address that is assigned to the AP.
In AP mode, the IP address is a LAN IP address. In router mode, the IP address
is a WAN IP address.
•
Subnet Mask: The subnet mask that is assigned to the AP.
•
Default Gateway: The IP address for the default gateway that the AP
communicates with.
In AP mode, the IP address is a LAN IP address. In router mode, the IP address
is a WAN IP address.
•
DHCP Server: The IP address for the Dynamic Host Configuration Protocol server
that provides the TCP/IP configuration to the AP.
In AP mode, the IP address is a LAN IP address. In router mode, the IP address
is a WAN IP address.
•
DNS Server: The IP address of the Domain Name Service server that provides
translation of network names to IP addresses.
In AP mode, the IP address is a LAN IP address. In router mode, the IP address
is a WAN IP address.
•
Lease Obtained: The date and time when the DHCP IP address lease was
obtained.
•
Lease Expires: The date and time that the DHCP IP address lease expires.
6.
When the AP receives an IP address dynamically, you can perform the following
actions:
•
Release the IP address: Click the Release button to terminate the DHCP IP
address, that is, terminate the Internet connection.
•
Renew the IP address: Click the Renew button to renew the DHCP IP address,
that is, renew the Internet connection.
User Manual109Maintain and Monitor
WiFi 6 AX1800/AX3200 Dual Band Wireless Access Points, WAX202 and WAX206