Need help?Do you have a question about the NETGEAR WAX610 and is the answer not in the manual?
General| 5 GHz | Yes |
|---|---|
| MIMO type | Multi User MIMO |
| Number of users | 250 user(s) |
| Networking standards | IEEE 802.11a, IEEE 802.11ac, IEEE 802.11ax, IEEE 802.11b, IEEE 802.11g, IEEE 802.11i, IEEE 802.11n, IEEE 802.1x, IEEE 802.3af, IEEE 802.3at |
| Spread spectrum method | OFDM, OFDMA |
| Ethernet LAN data rates | 10, 100, 1000, 2500 Mbit/s |
| Maximum data transfer rate | 1800 Mbit/s |
| Maximum data transfer rate (5 GHz) | 1200 Mbit/s |
| Maximum data transfer rate (2.4 GHz) | 600 Mbit/s |
| Placement | Ceiling, Wall |
| Product color | White |
| LED indicators | LAN, Power, Status |
| Antenna type | Internal |
| Antenna gain level (max) | 4.5 dBi |
| Number of products included | 1 pc(s) |
| Input current | 2.5 A |
| AC input voltage | 12 V |
| USB 2.0 ports quantity | 0 |
| Ethernet LAN (RJ-45) ports | 1 |
| Security algorithms | EAP-PEAP, EAP-TLS, EAP-TTLS, PEAP, SSH, SSL/TLS, WPA, WPA2, WPA2-Enterprise, WPA3 |
| Number of SSID supported | 8 |
| Service Set Identifier (SSID) features | Multiple SSIDs, SSID broadcast, SSID broadcast on/off |
| Package depth | 455 mm |
| Package width | 220 mm |
| Package height | 235 mm |
| Package weight | 3980 g |
| Operating temperature (T-T) | 0 - 40 °C |
| Harmonized System (HS) code | 85176990 |
Weight and Dimensions| Depth | 160.9 mm |
|---|---|
| Height | 33.25 mm |
| Weight | 412 g |
Provides essential safety guidelines for using the access point indoors to prevent injury or damage.
Provides guidelines for optimal placement of the access point for the best WiFi performance.
Describes how to connect the access point to your network using a PoE+ switch.
Outlines methods to connect to the access point for initial setup via app, cloud portal, or browser UI.
Details how to log in to the access point's local browser UI after initial setup is complete.
Guides on installing the NETGEAR Insight app for managing mesh WiFi networks.
Provides steps to connect an access point as an extender to a root access point in a mesh network.
Details how to set up new WiFi networks (SSIDs) and configure their security settings.
Explains how to view and modify existing WiFi network (SSID) configurations.
Guides on changing WiFi security settings like WPA3, WPA2, and encryption methods.
Explains how to enable or disable the broadcast of the WiFi network name (SSID) for security.
Details how to enable or disable client isolation to control communication between WiFi clients.
Explains how to manage band steering for improved WiFi performance and client roaming.
Guides on setting upload and download bandwidth limits for WiFi clients.
Guides on setting up a basic captive portal where the splash page is stored on the access point.
Details the process of registering the access point with Facebook Wi-Fi for customer check-ins.
Explains how to create a blacklist to block specific websites and keywords.
Details how to create and manage local MAC access control lists (ACLs) for WiFi access.
Explains how to disable DHCP and assign a static IP address to the access point.
Details how to switch between NETGEAR Insight and Web-browser management modes.
Guides on changing the password for the admin user account for local browser UI access.
Provides methods for checking and upgrading the access point's firmware.
Explains how to back up and restore the access point's configuration settings.
Explains how to reset the access point to its original factory default settings.
Provides steps to configure WiFi bridge settings between two access points.
Explains how to perform a ping test to check network connectivity and view results.
Provides basic troubleshooting steps for common WiFi connectivity issues.
Explains how to interpret LED status lights for troubleshooting startup and connectivity issues.
Troubleshooting steps when an extender access point cannot connect to a root access point.
Provides steps to diagnose and resolve issues with WiFi device connectivity.
Lists the default settings for management, WiFi, and general system configurations.
To Next Page
