Hardware interfaces
The bottom panel of the access point has a LAN/PoE+ port, Reset button, and DC power
connector for an optional power adapter.
Figure 2. Hardware interfaces of the access point
The bottom panel contains the following components:
•
Reset button. You can use the Reset button to restart the access point or to reset
the access point to its factory default settings. To restart the access point, press the
Reset button for about two seconds. Pressing the Reset for 10 seconds or longer
resets the access point to factory default settings.
Note: If you added the access point to a NETGEAR Insight network location, you
must first use the Insight app or Insight Cloud portal to remove the access point from
your Insight network location before the factory default settings function of the Reset
button is available. For more information, see Use the Reset button to reset the
access point on page 161.
User Manual14Hardware Overview
Insight Managed WiFi 6 AX1800 Dual Band Access Point WAX610 User Manual
To Next Page
Loading...
