NETGEAR WAX610 - Mount the Access Point to a Wall

Mount the access point to a wall
To mount the access point to a wall:
1.
The bottom of the access point includes two holes that let you mount the access
point on two screws inserted in a wall.
2. Mark the wall where you want to insert the provided anchors and screws, which must
be 3.875 in. (98.5 mm) apart.
3.
Insert the anchors and screws, but leave about 0.25 in. (6 mm) of each screw
protruding from the wall so that you can insert the screws into the holes on the
bottom of the access point.
3.875 in. (98.5 mm)
User Manual225Mount the Access Point on a
Wall or Ceiling
Insight Managed WiFi 6 AX1800 Dual Band Access Point WAX610 User Manual