NETGEAR WAX610 - Manage the Basic WiFi Features

5
Manage the Basic WiFi Features
This chapter describes how you can manage the basic WiFi settings of the access point.
The access point can support eight WiFi networks, each with its own unique WiFi settings,
including WiFi security.
Tip: If you want to change the settings of the access point’s WiFi network, use a wired
connection to avoid being disconnected when the new WiFi settings take effect.
The chapter includes the following sections:
• Set up an open or secure WiFi network
• View or change the settings of a WiFi network
• Disable or enable a WiFi network or set up a WiFi activity schedule
• Remove a WiFi network
• Change the authentication and encryption for a WiFi network
• Hide or broadcast the SSID for a WiFi network
• Enable or disable client isolation for a WiFi network
• Enable or disable band steering with 802.11k RRM and 802.11v WiFi network
management
• Change the VLAN ID for a WiFi network
• Enable or disable PMF for a WiFi network
• Enable or disable URL tracking for a WiFi network
• Change the format of the DHCP offer messages that the access point forwards
• Select a MAC ACL for a WiFi network
• Set bandwidth rate limits for a WiFi network
49