NETGEAR WAX610 - Mount the Access Point to a Solid Ceiling

4.
Line up the holes on the bottom of the access point with the screws in the wall and
mount the access point to the wall.
Mount the access point to a solid ceiling
To mount the access point to a solid ceiling:
1. Using the anchors and screws provided, attach the 15/16 in. (23.8 mm) bracket with
the screw holes to the ceiling.
The rectangular protruding part of the bracket must be facing the ceiling.
2.
Hold the access point upside down with the front of the access point facing the
bracket.
User Manual226Mount the Access Point on a
Wall or Ceiling
Insight Managed WiFi 6 AX1800 Dual Band Access Point WAX610 User Manual