Technical specifications model WAX206
The following table shows the technical specifications for model WAX206. For more
information, see the product data sheet, which you can download by visiting
netgear.com/support/download/.
Table 11. WAX206 AP specifications
DescriptionFeature
12V, 2.5A (30W)
The plug is localized to the country of sale.
Power consumption 20W maximum
Power adapter
6.7 x 2.5 x 9.5 in. (170 x 63 x 242 mm)Dimensions (L x W x H)
1.1 lb (497 g)Weight
32ºF to 104ºF (0°C to 40°C)Operating temperature
10 to 90% maximum relative humidity, noncondensingOperating humidity
–4°F to 158°F (–20ºC to 70ºC)Storage temperature
5 to 95% maximum relative humidity, noncondensingStorage humidity
One 2.5GBASE-T Ethernet (RJ-45) port with Auto Uplink (Auto MDI-X)WAN (Internet)
Four 10/100/1000BASE-T Ethernet (RJ-45) ports with Auto Uplink (Auto MDI-X)LAN
IEEE 802.11ax
IEEE 802.11ac
IEEE 802.11n 2.0
IEEE 802.11g
IEEE 802.11b
IEEE 802.11a
WiFi standards
2.4 GHz and 5 GHz, concurrent operationRadio bands
Up to 800 Mbps at 2.4 GHz
Up to 2400 Mbps at 5 GHz
Throughput can vary. Network conditions and environmental factors, including
volume of network traffic, building materials and construction, and network overhead,
affect the data throughput rate.
Maximum theoretical WiFi
throughput
The AP can support a maximum of 128 WiFi clients:
In a WiFi network, the actual number of clients might be limited by the amount of
WiFi traffic that is generated by each client.
Maximum number of
supported WiFi clients
The AP can support a maximum of 60 concurrent devices.Maximum number of
concurrent devices
User Manual160Factory Default Settings and
Technical Specifications
WiFi 6 AX1800/AX3200 Dual Band Wireless Access Points, WAX202 and WAX206
To Next Page
Loading...
