NETGEAR WAX202 - Page 6

Change the WiFi throughput mode for a radio............................124
Change the WiFi throughput mode on model WAX202.......124
Change the WiFi throughput mode on model WAX206.......126
Change the CTS/RTS threshold and preamble mode for a radio.128
Change the transmission output power for a radio.....................129
Add a WiFi schedule for a radio.....................................................131
Enable or disable MU-MIMO..........................................................133
Enable or disable explicit beamforming.......................................134
Enable or disable PMF.....................................................................135
Chapter 11 Diagnostics and Troubleshooting
Reboot the AP from the local browser UI......................................138
Quick tips for troubleshooting.......................................................139
Restart your AP network if the AP is in router mode...............139
Restart your AP if it is operating in AP mode...........................139
Check the Ethernet cable connections.....................................139
Check the WiFi settings of your computer or mobile device..140
Check the DHCP network settings of your computer or mobile
device............................................................................................140
Standard LED behavior when the AP is powered on...................141
Troubleshoot with the LEDs............................................................141
Power LED is off...........................................................................141
Power LED does not turn green.................................................142
WAN (Internet) LED remains off [router mode].......................142
WAN (Internet) LED remains off [AP mode].............................143
One or both WLAN LEDs are off................................................143
A LAN LED is off while a device is connected..........................143
You cannot log in to the AP............................................................144
You cannot log in to the AP [router mode]..............................144
You cannot log in to the AP [AP mode]....................................145
You cannot access the Internet [router mode].............................147
Check the Internet WAN IP address [router mode]................147
Check or manually start the PPPoE connection [router mode].149
Troubleshoot your Internet connection [router mode]...............150
Troubleshoot the WiFi connectivity...............................................150
Changes are not saved....................................................................152
Troubleshoot your network using the ping utility of your computer
or mobile device...............................................................................152
Test the LAN path from a Windows-based computer to the
AP...................................................................................................152
Test the path from a Windows-based computer to a remote
device [router mode]...................................................................153
6
WiFi 6 AX1800/AX3200 Dual Band Wireless Access Points, WAX202 and WAX206