If your browser displays a security warning, you can proceed, or add an exception
for the security warning. For more information, see kb.netgear.com/000062980.
3. Enter the AP login password and click the LOGIN button.
The AP login password is the one that you specified the first time you logged in to
the AP. The password is case-sensitive.
The Dashboard page displays.
4. Select Management > Network > Wireless.
The page that displays shows the Wireless Settings section and other sections.
5. Select the Band Steering Enable radio button.
By default, band steering is disabled and the Status Disable radio button is selected.
6. Click the Apply button.
A pop-up window displays.
7. Click the OK button.
Your settings are saved.
User Manual77Manage the WiFi Radio Settings
Essentials WiFi 6 AX4200 Dual Band Multi-Gig Access Point Model WAX220
To Next Page
Loading...
