NETGEAR WAX615-100NAS - Page 183

A login window displays.
If your browser displays a security warning, you can proceed, or add an exception
for the security warning. For more information, see What to do if you get a browser
security warning on page 43.
3. Enter the access point user name and password.
The user name is admin. The password is the one that you specified. The user name
and password are case-sensitive.
If you previously added the access point to a NETGEAR Insight network location and
managed the access point through the Insight Cloud Portal or Insight app, enter the
Insight network password for that location. For more information, see Connect over
WiFi using the NETGEAR Insight app on page 25.
The Dashboard page displays.
4.
Locate the Radio Information pane at the top, right corner of the Dashboard page
(if the page width on your device is sufficient; otherwise, it might be elsewhere).
The following settings are displayed:
•
Radio status (If the 2.4 GHz or 5 GHz icon is displayed as gray, the radio is turned
off.)
•
Mode
•
Channel
•
Channel width
•
Number of connected clients and maximum number of supported clients
•
WiFi traffic volume
•
Channel utilization
5.
To view information about the other radio, click either the 2.4 GHz or 5 GHz tab.
The pane adjusts.
User Manual183Monitor the Access Point and the
Network
Insight Managed WiFi 6 AX3000 Access Point Model WAX615