B
Mount the Access Point to a Wall or
Ceiling
You can mount the access point to a wall or to a ceiling with a 15/16 in. (24 mm) T-bar,
or you can install the access point freestanding on a flat surface.
We recommend that you use a flat Ethernet cable so that the cable fits in the narrow
space between the access point and the surface on which it is mounted or placed.
Before you mount the access point, first set up and test the access point to verify WiFi
network connectivity.
This appendix includes the following sections:
• Mounting parts
• Mount the access point on a wall
• Mount the access point to a T-bar
• Unmount the access point
256
To Next Page
Loading...
