NETGEAR WAX615-100NAS - Mount the access point to a T-bar

7. Attach the access point to the mounting plate.
8. Twist the access point clockwise to lock it onto the mounting plate.
Mount the access point to a T-bar
To mount the access point to a T-bar:
1.
If the T-bar lock is not yet attached to the metal bracket, slide the T-bar lock partially
into the metal bracket.
2. Attach the metal bracket to the T-bar.
3. Push the T-bar lock over the T-bar.
User Manual259Mount the Access Point to a Wall
or Ceiling
Insight Managed WiFi 6 AX3000 Access Point Model WAX615