NETGEAR WAX630 - Managing and Maintaining the Access Point

10
Manage and Maintain the Access
Point
This chapter describes how you can manage and maintain the access point.
The chapter includes the following sections:
• Change the management mode to NETGEAR Insight or Web-browser
• Change the country or region of operation
• Change the admin user account password
• Change the system name
• Specify a custom NTP server
• Set the time zone
• Manage the syslog settings
• Manage the firmware of the access point
• Manage the configuration file of the access point
• Reboot the access point from the local browser UI
• Schedule the access point to reboot
• Return the access point to its factory default settings
• Enable SNMP and manage the SNMP settings
• Manage the LEDs
• Manage the Energy Efficiency Mode
Note: In this manual, WiFi network means the same as SSID (service set identifier or
WiFi network name) or VAP (virtual access point). That is, when we refer to a WiFi network
we mean an individual SSID or VAP.
150