NETGEAR WAX630 - Technical Specifications

Technical specifications
The following table shows the technical specifications.
Table 4. Technical specifications
DescriptionFeature
2.4 GHz radio: 802.11ax, 802.11ng, 801.11bg, and 802.11b
5 GHz L radio: 802.11ax, 802.11ac, 802.11na, and 802.11a
5 GHz H radio: 802.11ax, 802.11ac, 802.11na, and 802.11a
The access point supports 2.4 GHz, 5 GHz low band, and 5 GHz high band concurrent
operation.
WiFi modes
About 6000 Mbps simultaneous throughput (1200 Mbps in the 2.4 GHz band,
2400 Mbps in the 5 GHz low band, and 2400 Mbps in the 5 GHz high band).
Note: Throughput can vary. Network conditions and environmental factors, including
volume of network traffic, building materials and construction, and network overhead,
affect the data throughput rate.
Maximum theoretical
throughput
2.4 GHz radio: 200
5 GHz L radio: 200
5 GHz H radio: 200
The access point can support a maximum of 600 clients with all radios enabled.
Maximum number of
supported clients
WPA3 Personal, WPA3 Enterprise, WPA3/WPA2 Personal, WPA2 Personal, WPA2
Enterprise, WPA2/WPA Personal, Open Enhanced, and Open
802.11 security
IEEE 802.11ax (WiFi 6)
WiFi Multimedia Prioritization (WMM)
Wireless distribution system (WDS)
WiFi standards
12 (4+4+4) streams:
2.4 GHz radio: 4 streams
5 GHz L radio: 4 streams
5 GHz H radio: 4 streams
WiFi streams
2.4 GHz band:
•
US and Canada: 2.412–2.462 GHz
•
Europe: 2.412–2.472 GHz
5 GHz low band:
•
US and Canada: 5.18–5.24 GHz and DFS 5.25–5.35 GHz
•
Europe: 5.18–5.24 GHz and DFS 5.25–5.35 GHz
5 GHz high band:
•
US and Canada: 5.475–5.825 GHz and DFS 5.47–5.725 GHz
•
Europe: DFS 5.50–5.70 GHz
Operating frequency
ranges
User Manual260Factory Default Settings and
Technical Specifications
Insight Managed WiFi 6 AX6000 Tri-band Multi-Gig Access Point Model WAX630