Note: If you added the access point to a NETGEAR Insight network location, you
must first use the Insight Cloud Portal or Insight app to remove the access point from
your Insight network location before the factory default settings function of the Reset
button is available. For more information, see Use the Reset button to reset the
access point on page 171.
Access point label
The access point label on the bottom panel shows the QR code, serial number, MAC
address, setup WiFi network name (SSID), and network key (password) of the access
point.
Figure 3. Access point label location
Figure 4. Access point label
User Manual16Hardware Overview
Insight Managed WiFi 6 AX6000 Tri-band Multi-Gig Access Point Model WAX630
To Next Page
Loading...
