If the path is functioning correctly, replies as described in Test the LAN path to your
access point on page 252 display. If you do not receive replies, do the following:
•
Check to see that your computer lists the IP address of the router to which the access
point is connected as the default router. If the IP configuration of your computer is
assigned by DHCP, this information is not visible in your computer’s Network Control
Panel.
•
Check to see that the network address of your computer (the portion of the IP address
specified by the netmask) is different from the network address of the remote device.
User Manual253Diagnostics and
Troubleshooting
Insight Managed WiFi 6 AX6000 Tri-band Multi-Gig Access Point Model WAX630
To Next Page
Loading...
