Unpack the access point
The package contains the following items:
•
NETGEAR WAX638E access point
•
Mounting plate
•
Metal bracket with T-bar, lock screw, and four short screws
•
Three tall screws and anchors for wall mounting
•
Installation guide
Note: Model WAX638E ships without a power adapter. Model WAX638EP ships with
a power adapter (the type of power adapter varies by region). If you ordered model
WAX638E but prefer to use the access point without a PoE++ connection, you can order
a power adapter separately.
For information about the mounting options, see Mount the Access Point to a Wall or
Ceiling on page 260.
Top panel with LEDs
The LEDs that provide the status of the access point are located on the top panel of the
access point.
Figure 1. Top panel with LEDs
User Manual12Hardware Overview
Insight Managed WiFi 6E AXE7800 Tri-band Multi-Gig Access Point Model WAX638E
To Next Page
Loading...
