NETGEAR WAX638E - Page 126

7. Click the Apply button.
Your settings are saved. Neighbor AP detection is now enabled.
8. From the Detection Policy menu, select the scan method:
•
Mild: The access point scans for neighbor access points every hour. This is the
default setting.
•
Moderate: The access point scans for neighbor access points every 30 minutes.
•
Aggressive: The access point scans for neighbor access points every 15 minutes.
Detected neighbor access points display in the Unknown AP List.
User Manual126Manage Access and Security
Insight Managed WiFi 6E AXE7800 Tri-band Multi-Gig Access Point Model WAX638E