-
Wireless MAC Address for 5 GHz: The MAC address of 5 GHz WiFi interface
(radio) of the access point.
-
Wireless MAC Address for 5 GHz High: The MAC address of 5 GHz high
band WiFi interface (radio) of the access point.
-
Wireless MAC Address for 6 GHz: The MAC address of 6 GHz WiFi interface
(radio) of the access point.
-
Power Source: The type of power source (PoE 802.3bt, 802.3at, or Power
Adapter).
For more information about the PoE level, see The access point functions as
a PoE PD and the Power/Cloud LED remains solid amber on page 241.
-
Ethernet LLDP: The status of Ethernet LLDP feature (Enabled or Disabled).
-
Country / Region: The country or region in which the access point operates
or for which the access point is licensed.
-
Current Firmware Version: The version of the firmware that is running on
the access point.
-
Backup Firmware Version: The version of the backup firmware on the access
point.
- Bootloader Version: The primary bootloader (U-Boot) version that is installed
on the access point.
-
Serial Number: The serial number of the access point.
-
Current Time: The current system time of the access point.
- Uptime: The time since the access point was last restarted.
•
AP Interface Status: A green icon indicates that the interface is in use. A gray
icon indicates that the interface is not in use.
•
IPv4 Settings section: The following settings are displayed:
-
IPv4 Address: The IPv4 address of the access point.
-
Subnet Mask: The subnet mask of the access point.
-
Default Gateway: The default gateway for the access point.
-
DHCP Client: The status of DHCP client (Enabled or Disabled).
-
LAG Status: The status of the LAG feature (Enabled or Disabled), independent
of whether a physical LAG connection is present.
User Manual185Monitor the Access Point and the
Network
Insight Managed WiFi 6E AXE7800 Tri-band Multi-Gig Access Point Model WAX638E
To Next Page
Loading...
